Corner Bond Beam Crack
This pool's bond beam had developed a small crack in the corner — most likely the result of deck settling putting pressure and stress on that spot.
We demoed out the damaged section while saving the original coping and water line tile, then rebuilt the beam with high-strength concrete reinforced with epoxy-doweled rebar. We also installed an expansion joint behind the beam to absorb future deck movement and keep the crack from coming back. From there we re-set the coping and water line tile and patched the plaster back in, restoring the pool's original finishes.
The repair, step by step
-
01
Cracked pool bond beam corner opened up for repair. -
02
Damaged bond beam section demoed out with original coping and tile saved. -
03
New rebar epoxy-doweled into the pool bond beam before the pour. -
04
High-strength concrete poured to rebuild the pool bond beam. -
05
Original coping and water line tile reset on the rebuilt beam. -
06
Finished bond beam crack repair with plaster and tile restored.
More about tile line cracks
Tile and bond beam leaks, typically caused by structural cracking and waterproofing failures.
Losing water and not sure where?
We cover Volusia, Flagler, and Brevard counties — residential and commercial.